Product ID:VALVE GRINDING COMPOUND, VGC362
MSDS Date:02/09/1998
FSC:5350
NIIN:00N088543
Status Code:A
MSDS Number: CHSMP

NIAGARA GRINDING WHEEL INC

BUFFALO, NY 14207
US

Emergency Phone: 800-638-5038

Info Phone: 800-638-5038

Cage: 0BXF4

NIAGARA GRINDING WHEEL INC

BUFFALO, NY 14207 US

Telephone: 716-875-1335

Cage: 0BXF4

SILICON CARBIDE

CAS: 409-21-2

RTECS: VW0450000

Fraction By Weight: 30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CALCIUM STEARATE

CAS: 1592-23-0

RTECS: WI3000000

Fraction By Weight: 10%

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-52-5

RTECS: PY8035001

Fraction By Weight: 52%

OSHA PEL N/K

ACGIH TLV: N/K

POLYOXYETHYLENESORBITOL OLEATE

CAS: 9005-65-6

RTECS: WG2932500

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: N/K

BENTONITE; (WYOMING BENTONITE)

CAS: 1302-78-9

RTECS: CT9450000

Fraction By Weight: 3%

OSHA PEL 5 MG/M3 (DUST)

ACGIH TLV: 5 MG/M3 (DUST)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT HAS BEEN USED FOR YEARS
WITH NO KNOWN ILL EFFECTS. INHALATION:NO KNOWN ADVERSE EFFECTS.
SKIN:SOME MAY EXPERIENCE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . INGEST:DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
SKIN:WASH AFFECTED AREAS W/SOAP & WATER. GET MEDICAL ATTENTION.
EYES:FLU SH W/LARGE AMOUNTS OF WATER. GET MEDICAL ATTENTION.

Flash Point:360F,182C
Extinguishing Media:EXTINGUISH W/WATER FOG, CO*2, DRY CHEMICAL, FOAM,
EARTH OR SAND.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:FLUSH W/WATER, ABSORB W/SAND OR INERT
MATERIAL, SWEEP OR SCOOP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID CONTACT W/EYES; CONTAINS FINE
ABRASIVES. STORE IN COOL AREA. DO NOT GET IN EYES ON ON CLOTHING.
NORMAL CLEAN-UP PROCEDURES.
Other Precautions:KEEP AWAY FROM SPARKS & OPEN FLAMES.

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE W/PROPER VENTILATION.
Protective Gloves:NEOPRENE OR POLYETHYLENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:650F,343C
Melt/Freeze Pt:M.P/F.P Text:200F,93C
Spec Gravity:0.9-1.4
Solubility in Water:46-90%
Appearance and Odor:FLUID GREASE; BLAND ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAME.
Hazardous Decomposition Products:CO/CO*2 IF INCOMPLETE COMBUSTION.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . INCINERATE. STANDARD LANDFILL METHODS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.